Flat valuation without heating in Prague: how technical defects affect the price
Published 22 November 2026
A flat without working heating in Prague is not valued by a fixed deduction, but rather by the cost of bringing it to a standard liveable condition, the risk involved and the time needed for repairs. From the price of a comparable flat in good condition, these costs are deducted, and for a cash purchase the buyer will add a reserve for uncertainty. The result depends on the type of heating system, the building's condition and whether the fault is only in the flat or affects the whole building.
Summary
- The price is reduced by real repair costs, uncertainty about the extent of damage, and the time the flat cannot be fully occupied or rented out.
- What matters is whether faulty heating is inside the flat or part of the building's shared heating system.
- In Prague, deductions tend to be smaller than in rural areas, as there is broader demand and flats sell faster.
- Documentation helps justify the price: inspection certificates, photographs, repair quotes and the energy performance certificate.
- A cash buyer calculates the price after deducting repairs and risk; you will receive a written offer with a detailed breakdown within 24 hours.
How a flat without working heating is valued
Both valuers and cash buyers start from the price of a comparable flat in the same location in standard condition and deduct the cost of remedying the defect.
The procedure is essentially the same as described in our article on property valuation methods: comparison with similar flats, adjustment for technical condition and specific building factors. Non-functioning heating is not calculated as a fixed percentage deduction. Instead, the following are considered:
- repair or replacement costs – depending on whether a service is sufficient or whether a new heat source or new pipework is needed,
- uncertainty about the extent of damage – hidden defects cannot be precisely calculated, so a reserve is factored in,
- time – the flat cannot be fully occupied or rented out during repairs,
- impact on usability – dampness, mould or the need to use electric heating increases operating costs and reduces buyer interest.
A general explanation of all factors affecting the result can also be found in the overview of free property valuation.
Which technical defects have the biggest impact on price
Defects that are expensive to fix, reduce livability and cannot be quickly assessed by a buyer have the biggest impact on price.
Heating
- Non-functioning or outdated heat source (gas boiler, electric heater, direct electric heating) – the buyer expects replacement and a full inspection.
- Damaged pipework and radiators – leaks and corrosion are most problematic, as they can cause damage to neighbouring flats too.
- Not connected to gas or disconnected flat – requires a new solution and often approval from other parties.
- Chimney, flue and ventilation ducts – without a valid inspection certificate, operation of the heat source may not be allowed.
Insulation and building envelope
- Poor insulation in walls, roof or ceilings – higher energy consumption and lower comfort.
- Water penetration, dampness and mould – the buyer fears hidden consequences and a larger scope of repairs.
- Old windows and thermal bridges – reduce value less than non-functioning heating, but worsen overall impression and the energy performance rating.
Defects usually don't occur in isolation. Non-functioning heating combined with dampness is a much worse signal to a buyer than each defect separately.
Defect in the flat or in the shared areas of the building
The price is also affected by who is responsible for the defect: the flat owner must fix their own appliances, but shared pipework and the façade are dealt with by the whole building.
If a boiler or radiators within the flat are broken, the buyer deducts direct repair costs. If the defect is in shared areas, such as vertical pipes, a shared boiler room or building insulation, the situation is more complex. The owners' association or housing cooperative (as registered in the Czech Land Registry – katastr nemovitostí) decides on and finances the repair. Buyers therefore check whether repairs have been approved, whether a repair fund exists and whether special contributions are planned.
We recommend obtaining meeting minutes from the building management, the repair fund status and information about planned investments in advance. Clear documentation often protects the price, as neither a cash buyer nor a purchaser needs to assume the worst-case scenario. Conditions differ for cooperative flats (družstvo), more details can be found on our page about flat purchases.
Prague and rural areas: how valuations differ
In Prague, the deduction for a technical defect usually corresponds more closely to actual repair costs, while in rural areas it is increased by the difficulty of selling.
| Factor | Prague | Rural areas |
|---|---|---|
| Demand | Broad, flats sell even with defects | Narrower pool of buyers |
| Selling time | Faster, lower risk of delay | Longer, cash buyer builds in a reserve |
| Repair costs | Higher prices for tradespeople and materials | Often lower, but fewer available firms |
| Comparison data | Plenty of comparable sales | Fewer comparable sales, greater uncertainty |
| Impact of defect on price | Mainly corresponds to repair cost | A reserve is added for lower sellability |
In Prague, therefore, a good location can partly offset a defect. Even so, you cannot expect the defect to have no impact on price. We have a separate page on buying properties in Prague.
How cash buyers handle defects and what it means for you
A cash buyer purchases the flat in its current condition, so they factor in repairs, risk and time, but you save on arranging sales and repairs.
With a cash purchase, you avoid having to arrange repairs, finding tradespeople and waiting for a buyer who will accept the defect. On the other hand, the price is lower than for a flat without defects, as the cash buyer assumes the risk and costs. You should always receive your own calculation in writing and itemised. Our offer comes within 24 hours with an itemised breakdown. It is non-binding and you can withdraw until the contract is signed.
Legal services are included at no extra charge, with lawyer-managed escrow. Payment is made electronically; cash payments are limited by law (Act No. 254/2004 Coll.) to 270,000 CZK per day. When signing the purchase contract, a deposit of up to 1,000,000 CZK is possible. However, ownership passes only upon registration in the Czech Land Registry (katastr nemovitostí – under Act No. 256/2013 Coll.), and the registry office cannot decide before 20 days after notifying the owner. The average registration time is around 22 days. You can get an indication using the purchase price calculator.
Duty to disclose defects and how to improve the price
You should always inform the buyer of defects, as the seller is responsible for defects upon transfer under the Civil Code (Act No. 89/2012 Coll.).
Concealing a technical defect, such as non-functioning heating, can lead to a dispute over faulty performance (§ 1914 et seq. of the Civil Code). It is therefore advisable to describe the condition directly in the purchase contract. You can improve the price by taking these steps:
- photographs and description of the defect,
- current inspection certificate or expert assessment,
- repair cost quote,
- building energy performance certificate, if available,
- documentation from the owners' association about planned repairs.
If you have owned the flat for a short time, also consider income tax when selling. The Income Tax Act (Act No. 586/1992 Coll.) includes exemptions linked to, for example, a time test or primary residence status. Check the details with the Czech Tax Office or a tax adviser. The tax on acquisition of real property was abolished (Act No. 386/2020 Coll.), so the buyer does not pay it.
What to do now
Prepare basic documents and have your flat assessed; get a non-binding offer or assessment via the form below the article.
- Describe what is wrong with the heating or insulation and take photographs.
- Ask the building management for information about the repair fund and planned investments.
- Prepare a current extract from the Czech Land Registry (katastr nemovitostí) and any inspection certificates.
- Assess whether repair is worthwhile or if selling in the current state is better for you.
- Fill in the form below the article. Assessment and offer are non-binding, without pressure, and the decision is yours.
If you would first like to get an idea, use our free online property valuation.